How do I program my keyless entry Ford Focus?

Three-button Keys Sit in the driver’s seat of the vehicle with all the keys. Insert one key into the ignition switch and turn to the “2D” position. Press and hold the “Unlock” button on the remote. Repeat Step 3 for the second key within 30 seconds of completing the first key’s programming. Turn the ignition off. Click to see full answer. Just so, how do you program a keyless entry remote for a Ford Focus? Product description Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. Within 20 seconds press any button on first keyless remote. Within 20 seconds, press any button on second keyless remote. Turn ignition to OFF. Similarly, how do I get my factory keyless entry code? From the vehicle list menu, select Door Keypad Code. Enter your factory key code that can be found in the owner’s manual. Enter your new personal key code. After you have entered in your factory code, wait for the prompt and enter in a new 5-digit key code of your choosing. People also ask, how do I program my Ford keyless entry? Step-by-Step Programming Instructions Close the car doors, then open the driver-side door. Press the UNLOCK button on the driver-side door. Next, turn the ignition from OFF to RUN 8 times. Press any button on the Ford remote to be programmed. Have a second remote key fob? Finally, turn the ignition to OFF. How do you reset a Ford Focus key fob?Insert the ignition key and turn from position II (Ignition) to position 0 (All off) and back four times within three seconds. Remove the ignition key. The locking control system is now in “learn mode” for the next 20 seconds and the red warning system LED (By the clock) stays on continuously to indicate this.