How do you light golden Blount gas logs?
1) LIGHTING – turn knob to “OFF” and wait 5 minutes before lighting. 2) Turn Dial to “PILOT” position. With match ready press knob in and hold for 60 seconds while lighting pilot. Golden Blount Gas Logs are warranted against defective materials and/or workmanship for as long as you own them.Click to see full answer….
1) LIGHTING – turn knob to “OFF” and wait 5 minutes before lighting. 2) Turn Dial to “PILOT” position. With match ready press knob in and hold for 60 seconds while lighting pilot. Golden Blount Gas Logs are warranted against defective materials and/or workmanship for as long as you own them.Click to see full answer. In this manner, how do I light the pilot on my gas logs?You turn the control knob to the pilot position, push the knob in, light the pilot with a match, then hold the knob down for 30 seconds or so until the pilot stays lit by itself. Once the pilot light will stay lit on its own, you can then move the knob to the “On” position.Subsequently, question is, do gas logs have a pilot light? Most gas fireplaces have a standing pilot light, which is a small flame that burns even when you aren’t using your fireplace. This makes it very quick and simple to start the fire when it’s cold outside, but many people shut off the pilot light when the weather warms up to conserve gas. Beside above, how do you light an old gas fireplace? The pilot knob has three positions: on, off and pilot. Move the pilot knob to the pilot position. This will allow you to push the knob in, which manually releases the flow of gas to the pilot. Now, while holding the pilot knob in, push the igniter button in once every second until the pilot is lit.Why won t my gas logs light?Pilot light systems are the most common reason gas fireplaces fail to light, so check the main gas valve to make sure the gas is turned on. If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Look for and clear out any debris between the igniter and thermocouple.
